features nec's 1w single control l, s-band spdt switch upg2015tb california eastern laboratories applications ? l, s-band digital cellular or cordless handsets ? pcs, w-lan, wll and bluetooth tm ? short range wireless nec's upg2015tb is a single control single control gaas mmic l, s-band spdt (single pole double throw) switch for mobile phone and l, s-band applications. this device can operate frequency from 0.5 to 2.5 ghz, with low insertion loss and high isolation. this device is housed in a 6-pin super minimold package, suitable for high-density surface mounting. description ? supply voltage: v dd = 2.7 to 3.0 v (2.8 v typ.) ? single switch control voltage: v cont (h) = 2.7 to 3.0 v (2.8 v typ.) v cont (l) = ? 0.2 to +0.2 v (0 v typ.) ? low insertion loss: l ins1 = 0.25 db typ. @ f = 0.5 to 1.0 ghz, v dd = 2.8 v, v cont = 2.8 v/0 v l ins2 = 0.30 db typ. @ f = 1.0 to 2.0 ghz,v dd = 2.8 v, v cont = 2.8 v/0 v l ins3 = 0.35 db typ. @ f = 2.5 ghz, v dd = 2.8 v, v cont = 2.8 v/0 v ? high isolation: isl1 = 27 db typ. @ f = 0.5 to 2.0 ghz, v dd = 2.8 v, v cont = 2.8 v/0 v isl2 = 24 db typ. @ f =2.5 ghz, v dd = 2.8 v, v cont = 2.8 v/0 v ? power handling: p in (0.1 db) = +27.0 dbm typ. @ f = 2.5 ghz, v dd = 2.8 v, v cont = 2.8 v/0 v ? high-density surface mounting: 6-pin super minimold package (2.0 1.25 0.9 mm) part number package marking supplying form upg2015tb-e3-a 6-pin super minimold g3j ? embossed tape 8 mm wide ? pin 1, 2, 3 face the perforation side of the tape ? qty 3 kpcs/reel ordering information remark to order evaluation samples, contact your nearby sales of?ce. part number for sample order: u pg2015tb caution observe precautions when handling because these devices are sensitive to electrostatic discharge.
upg2015tb absolute maximum ratings (t a = 25c, unless otherwise speci?ed) recommended operating range (t a = 25c, unless otherwise speci?ed) pin no. pin name 1 output1 2 gnd 3 output2 4 v cont 5 input 6 v dd truth table vcont input?output1 input?output2 low off on high on off pin connections and internal block diagram parameter symbol ratings unit supply voltage v dd +6.0 v switch control voltage v cont +6.0 v input power p in +33 dbm operating ambient temperature t a ? 45 to +85 c storage temperature t stg ? 55 to +150 c parameter symbol min. typ. max. unit supply voltage v dd 2.7 2.8 3.0 v switch control voltage (h) v cont (h) 2.7 2.8 3.0 v switch control voltage (l) v cont (l) ? 0.2 0 0.2 v (top view) 3 2 1 4 5 6 g3j (bottom view) 4 5 6 3 2 1 (top view) 3 2 1 4 5 6
electrical characteristics (t a = +25 c, v dd = 2.8 v, v cont = 2.8 v/0 v, dc blocking capacitors = 56 pf, unless otherwise speci?ed) standard characteristics for reference (t a = +25 c, v dd = 2.8 v, v cont = 2.8 v/0 v, dc blocking capacitors = 56 pf, unless otherwise speci?ed) parameter symbol test conditions min. typ. max. unit 1 db gain compression input power note p in (1 db) f = 2.0 ghz ? +30.0 ? dbm note p in (1 db) is the measured input power level when the insertion loss increases 1 db more than that of linear range. parameter symbol test conditions min. typ. max. unit insertion loss 1 l ins1 f = 0.5 to 1.0 ghz ? 0.25 0.45 db insertion loss 2 l ins2 f = 1.0 to 2.0 ghz ? 0.30 0.50 db insertion loss 3 l ins3 f = 2.5 ghz ? 0.35 0.55 db isolation 1 isl 1 f = 0.5 to 2.0 ghz 23 27 ? db isolation 2 isl 2 f = 2.5 ghz 20 24 ? db input return loss rl in f = 0.5 to 2.5 ghz 15 20 ? db output return loss rl out f = 0.5 to 2.5 ghz 15 20 ? db 0.1 db gain compression input power note p in (0.1 db) f = 2.0 ghz +25.5 +27.0 ? dbm f = 2.5 ghz +25.5 +27.0 ? dbm supply current i dd ? 50 100 a switch control current i cont ? 4 20 a switch control speed t sw ? 0.3 2.0 s note p in (0.1 db) is the measured input power level when the insertion loss increases 0.1 db more than that of linear range. caution it is necessary to use dc blocking capacitors with the device. the value of dc blocking capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and the condition with actual board of your system. the range of recommended dc blocking capacitor value is less than 100 pf. upg2015tb upg2015tb
4-277 upg2015tb upg2015tb evaluation circuit (v dd = 2.8 v, v cont = 2.8 v/0 v, dc blocking capacitors = 56 pf) the application circuits and their parameters are for reference only and are not intended for use in actual design-ins. output1 output2 56 pf 56 pf 4 5 6 3 2 1 v dd v cont input 56 pf 1 000 pf 1 000 pf
upg2015tb upg2015tb illustration of the test circuit assembled on evaluation board using the nec evaluation board symbol values c1, c2, c3 56 pf c4, c5 1 000 pf 6pin smm spdt sw vc1 vc2 in out 1 out 2 c1 c1 c3 c5 c1 c 2 c 4 c1 c2 c2 v dd output1 input output2 v cont g3j
upg2015tb upg2015tb remark the graphs indicate nominal characteristics. typical characteristics (t a = 25oc, v dd = 2.8 v, v cont = 2.8 v/0 v, dc blocking capacitors = 56 pf, unless otherwise speci?ed) 0.5 0 C1.0 C0.5 C2.0 C1.5 C2.5 C3.0 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 i nsers i on l oss l in s (db) frequency f (ghz) inputCoutput1 insersion loss vs. frequency 20 10 C10 0 C30 C20 C40 C50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 i so l at i on isl (db) frequency f (ghz) inputCoutput1 isolation vs. frequency 20 10 C10 0 C30 C20 C40 C50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 i nput r eturn l oss rl in (db) fr eque n cy f (g hz ) inputCoutput1 input return loss vs. frequency 20 10 C10 0 C30 C20 C40 C50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 isolation isl (db) frequency f (ghz) inputCoutput2 isolation vs. frequency 20 10 C10 0 C30 C20 C40 C50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 input return loss rl in (db) fr eque n cy f (g hz ) inputCoutput2 input return loss vs. frequency 0.5 0 C1.0 C0.5 C2.0 C1.5 C2.5 C3.0 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 insersion loss l in s (db) frequency f (ghz) inputCoutput2 insersion loss vs. frequency
upg2015tb remark the graphs indicate nominal characteristics. 30 32 20 22 24 26 28 8 10 12 14 16 18 10 12 14 16 18 20 22 24 26 28 30 32 34 o utput p ower p out (db m ) in p ut power p in ( dbm ) output power vs. input power f = 1.0 ghz 28 30 8 10 12 14 16 18 20 22 24 26 10 12 14 16 18 20 22 24 26 28 30 32 output power p out (dbm) in p ut power p in ( dbm ) output power vs. input power f = 2.5 ghz 20 10 C10 0 C30 C20 C40 C50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 o utput r eturn l oss rl out (db) frequency f (ghz) inputCoutput1 output return loss vs. frequency 20 10 C10 0 C30 C20 C40 C50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 output return loss rl out (db) frequency f (ghz) inputCoutput2 output return loss vs. frequency
upg2015tb package dimensions 6-pin super minimold (unit: mm) 0.90.1 0.7 0 to 0.1 0.15 +0.1 -0.0 5 0.2 +0.1 -0.0 5 2.00.2 1.3 0.65 0.65 1.250.1 2.10.1 0.1 min.
upg2015tb recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recommended below, contact your nearby sales of?ce. soldering method soldering conditions condition symbol infrared re?ow peak temperature (package surface temperature) : 260 c or below time at peak temperature : 10 seconds or less time at temperature of 220 c or higher : 60 seconds or less preheating time at 120 to 180 c : 120 30 seconds maximum number of re?ow processes : 3 times maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below ir260 vps peak temperature (package surface temperature) : 215 c or below time at temperature of 200 c or higher : 25 to 40 seconds preheating time at 120 to 150 c : 30 to 60 seconds maximum number of re?ow processes : 3 times maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below vp215 wave soldering peak temperature (molten solder temperature) : 260 c or below time at peak temperature : 10 seconds or less preheating temperature (package surface temperature) : 120 c or below maximum number of ?ow processes : 1 time maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below ws260 partial heating peak temperature (pin temperature) : 350 c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below hs350 caution do not use different soldering methods together (except for partial heating). life support applications these nec products are not intended for use in life support devices, appliances, or systems where the malfunction of these prod ucts can reasonably be expected to result in personal injury. the customers of cel using or selling these products for use in such applications do so at their own risk and agree to fully indemnify cel for all damages resulting from such improper use or sale. a business partner of nec co m p ound semiconductor devices, ltd . 02/19/200 4
4590 patrick henry drive santa clara, ca 95054-1817 telephone: (408 ) 9 19-250 0 facsimile : ( 40 8 ) 988-0279 subject: compliance with eu directives cel certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of european union (eu) directive 2002/95/ec restriction on use of hazardous substance s i n electrical and electronic equipment (rohs) and the requirements of eu directive 2003/11/ec restriction on penta and octa bde. cel pb-free products have the same base part number with a suffix added. the suffix Ca indicates that the device is pb-free. the Caz suffix is used to designate devices containing pb which are exempted from the requirement of rohs directive (*). in all cases the devices have pb-free terminals. all devices with these suffixes meet the requirements of the rohs directive. this status is based on cels understanding of the eu directives and knowledge of the materials that go into its products as of the date of disclosure of this information . restricted substanc e per rohs concentration limit per rohs (values are not yet fixed) concentration contained in cel devices -a -a z lead (p b) < 1000 ppm not detected (*) mercury < 1000 ppm not detected cadmiu m < 100 ppm not detected hexavalent chromiu m < 1000 ppm not detected pbb < 1000 ppm not detected pbde < 1000 ppm not detected if you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. important information and disclaimer: informatio n p rovided by ce l o n its website or in other communications concertin g the substan ce content of its products represents knowledge and belief as of the date that it is provided. cel bases its know ledge and belief on informatio n provided by thir d p arties and makes no representation or warrant y as to the accura cy of such information. efforts are underw ay to better integrate information from third parties. cel has taken and continues to take reasonable steps to provide representative and ac curate information but ma y not have conducted destructive testing or chemical analysis on incoming ma terials and chemicals. cel and ce l suppliers consider certain information to be propri etar y, and thus cas numbers and other limited information may not be availabl e for release . in no event shall cels liability arising out of such information exceed the total purchase price of the cel part(s) at issue s old by cel to customer on an annual basis. see cel terms and conditions for additional clarification of wa rranties and liabilit y.
|
